logo

제품 세부 정보

Created with Pixso. Created with Pixso. 상품 Created with Pixso.
ESP 컨트롤러
Created with Pixso.

4 Axis CPU PLCs Digital Servo Module GE FANUC IC693DSM314 90-30 Series

4 Axis CPU PLCs Digital Servo Module GE FANUC IC693DSM314 90-30 Series

브랜드 이름: GE
모델 번호: IC693DSM314
MOQ: 1
가격: Negotiations
자세한 정보
원래 장소:
미국
시리즈:
시리즈 90-30
제품 유형:
운동제어 모듈
호환 성분:
PLC
작동 모드:
디지털, 아날로그
축 수:
4
작동 온도:
0 내지 60 도 섭씨
포장 세부 사항:
새로운 원본 상자
강조하다:

4 Axis CPU PLC module

,

GE FANUC IC693DSM314 servo module

,

90-30 Series digital servo controller

제품 설명
4 Axis CPU PLCs Digital Servo Module GE FANUC IC693DSM314 90-30 Series
GE FANUC IC693DSM314, Digital Servo Module, 90-30 Series CPU
Product Description
The Motion Mate Digital Servo Module IC693DSM314 by GE Fanuc operates as a motion control module for the 90-30 series. This module functions in two modes: digital mode and analog mode. Digital mode is designed for compatibility with digital servos while analog mode must be used to control servos that feature analog command input.
  • Compatible with Series 90-30 CPUs with firmware release 10.0 or later (not compatible with CPU311 through 341 and 351)
  • Non-volatile storage for 10 programs and 40 subroutines
  • Block processing time under 5 milliseconds
  • Automatic data transfer between PLC tables and DSM314 without user programming
  • Home and overtravel switch inputs for each Servo axis
  • User scaling of programming units in both Standard and Follower modes
  • Velocity feed forward and position error integrator to enhance tracking accuracy
  • Quadrature encoder input for follower master axis
  • Recipe programming using command parameters for velocity, move, acceleration, and dwell commands
  • Incremental quadrature encoder input on each axis for encoder/analog mode
  • 5V, 24V and analog I/O for use by PLC
  • High-speed digital output (four each 24V and four each 5V) via on board Local Logic Control
  • 13-bit Analog Output can be controlled by PLC or used as Digital Servo Tuning monitor
  • High resolution programming units with precise position, velocity, and acceleration ranges
  • Single point of connection for all programming and configuration tasks
  • Controls GE Fanuc α Series and β Series Digital servos, SL-series servos, or third-party servos
  • Position Capture Strobe Inputs with ±2 counts accuracy plus 10 microseconds variance
Technical Specifications
Brand GE Fanuc
Series Series 90-30
Part Number IC693DSM314
Compatible components Programmable logic controllers
Operation modes Digital, analog
Block processing time Less than 5 milliseconds
Number of axis 4
Programming units resolution (position) -536,870,912 to 536,870,911 user units per second
Programming units resolution (velocity) 1 to 8,388,607 user units per second
Programming units resolution (acceleration) 1 to 1,073,741,823 user units per second
Non-volatile storage 10 programs and 40 subroutines
Backplane current consumption 450 milliAmps at 5 Volts DC (typical)
Operating temperature 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Storage temperature -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
4 Axis CPU PLCs Digital Servo Module GE FANUC IC693DSM314 90-30 Series 0